Protection and comfort
for your spaces, without compromise.
for your spaces, without compromise.
Sekurclim l the rolling shutter with micro-perforated slats that facilitates control
of the brightness of the room, offering good ventilation combined with an
excellent degree of safety.
Thanks to the coupling system between the slats and the use of special selflocking profiles, the rolling shutter cannot be raised from the outside.
Sekurlook is the slatted rolling shutter with slots that allows the broad infiltration
of air and light. The size of the slot 120 x 12 mm ensures effective shielding
from sunlight during daylight hours and rapid air circulation in complete safety.
Easy to install when replacing old rolling shutters thanks to the special recessed guide.
300% more light
compared to a traditional rolling shutter.
10% more ventilation
compared to a traditional rolling shutter.
Micro-holes
Significantly attenuates solar radiation, offering a pleasant brightness inside rooms
Anti-insect design
the diameter of the micro-holes prevents intrusion of the most annoying insects
Anti-lift design
a mechanism that prevents intrusion from the outside
More light
Sekurlook is used to graduate the amount of direct light inside rooms.
Greater ventilation
The slots make this product essential when greater ventilation and the
protection of rooms is required.
Comfortable rooms
Sekurlook offers the right balance between air and light to increase the sense of well-being
Anti-lift design
A mechanism that prevents intrusion from the outside
Altura guía | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 |
ø mm | 170 | 175 | 185 | 200 | 215 | 230 | 240 | 245 |
Sekurclim and Sekurlook are exterior blackout systems made
with extruded aluminium alloy profiles EN AW 6060 with physical T5 supply state. The thickness dimensional tolerances
comply with the UNI EN 12020 2:2002 standard.
The Sekurclim and Sekurlook blinds consist of blind slats
(placed in appropriate quantities in the lower and upper part),
telescopic slats, characterised by a covering profile and a micro-perforated or slotted single-wall profile that slide inside
guides.
The blind slats and the telescopic slats are interconnected by
means of a coupling profile. This profile rolls up when the blinds
are lifted upwards. The contact points that are created with
the special seals placed inside the sliding guide generate frictional forces that counteract the lifting.
A series of caps, specially designed to allow normal operation
of the anti-lift system, prevent transversal sliding of the profiles.
At the bottom, to complete the composition, the blinds are
equipped with a terminal profile and a seal which ensures an
airtight seal with the floor.
In its entirety, the rolling shutters constitute a system for darkening and ventilation as well as being an advantageous security product.
Sekurclim and Sekurlook thave three positioning modes:
Sekurclim and Sekurlook combine the performance of a roller
shutter and the functionality of a sunscreen in a single product; they offer the possibility of modulating quantities of light
and air in complete safety, without compromising on the need
for complete darkening.
The blinds are characterised by a solar transmission factor of
0.026 with the slats in the closed position and 0.102 with the
slats in the open position (values calculated in accordance
with the UNI EN 13363-1:2008 and UNI EN 14501:2006 standards, for white blinds associated with double clear low emissive
glazing with argon with Ug=1.2 and W/m2 °K and g = 0.59).
Any light infiltrations on light colours are to be considered inherent to the construction specifications of the product.
The surface treatment of the profiles takes place by means of
powder coating with thermoplastic resins.
Installation of the products must be performed by specialist
technical personnel.
Disposal of the products must take place at authorised collection centres.
N.B. For glossy or matte RAL colours, the product is understood
as out of warranty.
Please contact the company in advance for more information.
Non-spec colours (surcharges with respect to the basic ral list):
• PAINTED +20%
• RAFFAELLO +30%
• WOOD +50%
* Immediate availability
** The production times will be 3 weeks
The colour references reported in this catalogue might appear altered by the
reproduction and printing process.
For greater safety, please refer to the colour sample book provided by the company. Prices are VAT excluded and can be subject of variation without info.
Subject to misprints and improved design changes.
RAL
MOSS
RAFFAELLO
WOOD
Los siguientes colores tienen la misma tarifa de precios de RAL GRINZ:
Make the order by indicating:
La tapparella verrà fornita con misure maggiorate, necessarie al corretto funzionamento.
Declared performances | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Essential characteristics | Architectural clearance dimensions | Performance | |||||||||||
Wind resistance class UNI EN 13659: 2015 | Width up to (mm) | Height (mm) | |||||||||||
2000 | 2500 | 6 | |||||||||||
2500 | 2000 | 6 | |||||||||||
3000 | 2400 | 4 | |||||||||||
Total transmittance of solar energy g tot | |||||||||||||
Roller shutter in closed position | Roller shutter in open position | ||||||||||||
Glass type | Ref. value | Colour | Bianco | Pastello | Scuro | Nero | Bianco | Pastello | Scuro | Nero | |||
4 16 argon 4 b.e. according to UNI EN 14501:2006 | Ug: W/m²K | 1,2 | gsh+gl (gtot) | 0,03 | 0,04 | 0,06 | 0,08 | 0,10 | 0,10 | 0,09 | 0,09 | ||
g: | 0,59 | Classificazione according to UNI 14501:2006 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | |||
3/3.1 15 argon 3/3.1 b.e. | Ug: W/m²K | 1,0 | gsh+gl (gtot) | 0,02 | 0,04 | 0,05 | 0,07 | 0,09 | 0,08 | 0,08 | 0,08 | ||
g: | 0,47 | Classification according to UNI 14501:2006 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 |
3/3.1 24 argon 3/3.1 b.e. | Ug: W/m²K | 1,1 | gsh+gl (gtot) | 0,02 | 0,04 | 0,06 | 0,07 | 0,09 | 0,09 | 0,09 | 0,08 | ||
g: | 0,47 | Classification according to UNI 14501:2006 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | Class 4 | |||
Essential characteristic | 14501:2006 | Harmonised technical specification | |||||||||||
Additional thermal resistance | UNI EN 13659 |
ARCH. | EXACT |
1000 | 1200 |
1050 | 1250 |
1100 | 1300 |
1150 | 1350 |
1200 | 1400 |
1250 | 1500 |
1300 | 1550 |
1350 | 1600 |
ARCH. | EXACT |
1400 | 1650 |
1450 | 1700 |
1500 | 1750 |
1550 | 1800 |
1600 | 1850 |
1650 | 1950 |
1700 | 2000 |
1750 | 2050 |
ARCH. | EXACT |
1800 | 2100 |
1850 | 2150 |
1900 | 2200 |
1950 | 2250 |
2000 | 2300 |
2050 | 2400 |
2100 | 2450 |
2150 | 2500 |
ARCH. | EXACT |
2200 | 1200 |
2250 | 2600 |
2300 | 2650 |
2350 | 2700 |
2400 | 2750 |
2450 | 2800 |
2500 | 2850 |